When a commercial concrete cement mixer truck malfunctions, if the mixing tank is not cleaned in a timely manner, it will solidify over time, which will bring us great economic losses. Do you know how to clean the commercial concrete inside the cement mixer truck in an emergency? Next, let's briefly introduce it.

方法一：

Method 1:

1、準備好緊急驅動軟管，將故障商品混凝土水泥攪拌運輸車熄火，卸下液壓的馬達上的高壓油管接頭。

1. Prepare the emergency drive hose, turn off the faulty commercial concrete cement mixer truck, and remove the high-pressure oil pipe connector from the hydraulic motor.

2、將救援車熄火，將其液壓的馬達的高壓油管卸下，并與故障車上的對應接頭用緊急驅動軟管相連。

2. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it to the corresponding connector on the faulty vehicle using an emergency drive hose.

3、發動救援車，將其操縱手柄撥出料位置，故障車內的商品混凝土即被排出。

3. Start the rescue vehicle, move its control handle to the discharge position, and the commercial concrete inside the faulty vehicle will be discharged.

4、緊急驅動完畢后，將驅動軟管卸下，并恢復兩車原狀。

4. After the emergency drive is completed, remove the drive hose and restore both vehicles to their original state.

方法二：

Method 2:

1、若個方法實行有困難，則采用以下方法，立即排出商品混凝土。

1. If there are difficulties in implementing this method, use the following method to immediately discharge the commercial concrete.

2、在托輪和滾道之間放入木楔，以控制攪拌筒的旋轉，一定要注意；將發動機熄火，拆松液壓的馬達的一根高壓油管，攪拌筒可隨意旋轉，控制攪拌筒的旋轉，使維修孔轉到下部，然后打開維修孔，清理出筒內商品混凝土。此時一定要注意，商品混凝土排出完畢后，恢復商品混凝土水泥攪拌運輸車原狀。緊急清理水泥攪拌運輸車內商品混凝土是我們每個水泥攪拌運輸車司機都應該會的，在水泥攪拌運輸車發生故障的時候，及時清理，將損失降到低。

2. Place a wooden wedge between the supporting wheel and the raceway to control the rotation of the mixing drum, and be sure to pay attention; Turn off the engine, loosen a high-pressure oil pipe from the hydraulic motor, and the mixing cylinder can rotate freely. Control the rotation of the mixing cylinder to turn the maintenance hole to the lower part. Then open the maintenance hole and clean the commercial concrete inside the cylinder. At this point, it is important to note that after the commercial concrete is discharged, the cement mixing and transportation vehicle for commercial concrete should be restored to its original state. Urgently cleaning the commercial concrete inside the cement mixer truck is something that every cement mixer truck driver should know. When the cement mixer truck malfunctions, it should be cleaned in a timely manner to minimize losses.

感謝您的閱讀，此文的文章來源：全自動攪拌車廠家更多的內容和問題請點擊：http://m.zvmc.cn 我們會繼續努力的為您提供服務，感謝您的支持！

Thank you for reading. The source of this article is from the manufacturer of fully automatic mixing trucks. For more information and questions, please click on: http://m.zvmc.cn We will continue to work hard to provide you with services. Thank you for your support!