當前位置：首頁 »新聞中心 » 行業動態要及時檢查攪拌機潤滑系統的哪些現象？

要及時檢查攪拌機潤滑系統的哪些現象？

來源：http://m.zvmc.cn 瀏覽：0發表時間：2021-03-16

混凝土攪拌機主要由攪拌主機、物料稱量系統、物料輸送系統、物料貯存系統和控制系統等5大系統和其他附屬設施組成。由于樓骨料計量與站骨料計量相比，減少了四個中間環節，并且是垂直下料計量，節約了計量時間，因此大大提高了生產效率。

The concrete Zhongke mixer is mainly composed of mixing host, material weighing system, material conveying system, material storage system and control system and other ancillary facilities. Compared with the station aggregate measurement, the building aggregate measurement reduces four intermediate links, and the vertical cutting measurement saves the measurement time, so the production efficiency is greatly improved.

軸端泄漏引起的軸承磨損和與混合軸的摩擦導致軸端高溫。主軸端是集中的部分。在高強度應力作用下，零件的使用壽命將大大縮短。因此，需要及時更換軸封裝置中的密封圈、油封、滑動輪和旋轉輪；并將主軸的末端泄漏端側的軸承建議為原密封附件，避免尺寸的差異和磨損，可迅速損壞主軸。

Bearing wear caused by shaft end leakage and friction with mixed shaft result in high temperature of shaft end. The spindle end is the concentrated part. Under the action of high strength stress, the service life of parts will be greatly shortened. Therefore, it is necessary to replace the seal ring, oil seal, sliding wheel and rotating wheel in the shaft seal device in time, and recommend the bearing at the leakage end of the spindle as the original sealing accessory, so as to avoid the size difference and wear, and quickly damage the spindle.

要及時檢查混凝土攪拌機潤滑系統的哪些現象？

What phenomena of lubrication system of concrete mixer should be checked in time?

那要及時檢查混凝土攪拌機潤滑系統的哪些現象呢？？對此你了解多少呢？今天河南省毅成重工機械制造有限公司的小編就這個問題給你介紹一下，希望對你有所幫助。

Which phenomena of lubrication system of concrete mixer should be checked in time?? How much do you know about it? Today, the editor of Henan Yicheng Heavy Industry Machinery Manufacturing Co., Ltd. will introduce this problem to you, hoping to help you.

1、潤滑系統中主油泵旋轉軸的磨損現象。

1. Wear phenomenon of main oil pump rotating shaft in lubrication system.

2、潤滑系統中的主油泵壓力表的接口柱塞不能正常工作。

2. The interface plunger of the main oil pump pressure gauge in the lubrication system can not work normally.

3、漸進式分油器安全閥閥芯在潤滑系統中堵塞，不能分油。

3. The safety valve core of progressive oil separator is blocked in the lubrication system and cannot separate oil.

感謝您的閱讀，希望以上內容對您有所幫助，如您想了解更多精彩內容請點擊我們的官網：攪拌機http://m.zvmc.cn。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Zhongke mixer http://m.zvmc.cn .

下一篇：自上料攪拌機的正常運行要注意哪些環節？上一篇：混凝土運輸攪拌車發動機大修的條件！