混凝土自上料攪拌車各操作閥的作用
混凝土自上料攪拌車施工優勢非常的明顯，雖然說操作簡單，但是需要操作才行，不會容易造成問題。為了更好的了解該設備，下面來了解個問題吧--混凝土自上料攪拌車各操作閥的作用是什么？
The construction advantage of concrete mixing truck from the loading is very obvious. Although the operation is simple, it needs professional operation, and it will not easily cause problems. In order to better understand the equipment, let's understand a problem -- what is the role of the operation valve of the concrete self-feeding mixer?
主車前后行走操縱閥（快慢檔，前進和倒車檔）-般行走時為前駕，施工作業時為后駕。大臂升降旋轉操縱閥，舉料，左右旋轉罐體控制。料斗上下料操縱閥，鏟料、卸料控制鏟斗作用。
The front and back running control valve of the main vehicle （fast and slow gear, forward and reverse gear） - it is the front driving when walking, and the rear driving when working. Big arm lifting rotary control valve, lifting material, left and right rotating tank control. Hopper up and down control valve, shovel, discharge control bucket function.
手動油門操縱閥，控制發動機的轉速，使攪罐在一定的平穩速度下旋轉。座椅腳踏定位卡銷，用于座椅調轉方向時起到鎖止作用，踏板踩向下時。鎖銷打開，左翼轉到位置后制動鎖止。
Manual throttle control valve, control engine speed, so that stirring tank in a certain steady speed under rotation. The seat foot positioning pin is used to lock the seat when the seat is turned and the pedal is pressed down. The lock pin opens, the left wing turns to position and the brake locks.
另外要做好日常保養，每次施工結束，必須清洗干凈車輛外表面和罐體內殘余科，以防混凝土凝聚在罐體內外。加強對發動機，齒輪箱，車橋周期性保養，長時間停用，水箱內不宜儲水。
In addition to do a good job of daily maintenance, at the end of each construction, it is necessary to clean the outer surface of the vehicle and the residual section of the tank, in order to prevent concrete condensation inside and outside the tank. Strengthen the periodic maintenance of the engine, gear box and axle, stop using for a long time, and do not store water in the water tank.
輪胎氣壓出車前檢查，及時補足氣壓。前后橋連接軸肖和各油缸軸套、前后傳動軸每天工作完畢要要注人黃油。混凝土自上料攪拌車廠家可以說好的用車習慣有利于延長車子的使用期限。
Check the tire pressure before leaving the car, and make up the pressure in time. Before and after the bridge connecting shaft shaw and each cylinder sleeve, before and after the drive shaft to fill butter after work every day. Concrete mixing truck manufacturers can say that good car habits are conducive to extending the service life of the car.
混凝土自上料攪拌車各操作閥的作用便是以上的講解內容，我們還能知道保養維修攪拌車的重要性，這樣才能讓攪拌車少出問題。更多內容就來網站m.zvmc.cn了解吧！
The role of the operation valve of the concrete mixing truck is the above explanation, we can also know the importance of maintenance and maintenance of the mixing truck, so as to make the mixing truck less problems. For more information, please visit m.zvmc.cn.
